Strapping & banding

Strapping that stays tight

Poly, polyester, and steel strapping with the seals and tools to match, so heavy loads arrive the way they left.

Strapped and stretch-wrapped pallets of boxes with flat corrugated and tape rolls in front
  • Serving Colorado since 1995
  • FREE delivery across the Denver metro
  • Net terms for businesses
  • Custom sizes, styles, and printing

Polypropylene, polyester, or steel?

StrapBest forKeep in mind
Polypropylene (poly)Light to medium loads, bundling, boxes; the most economicalStretches and loses tension over time, so it’s not for heavy loads that settle
Polyester (PET)Heavy pallet loads, loads that shift or settle, long tripsHolds tension better than poly and replaces steel on many heavy loads, without rust or sharp cut ends
SteelThe heaviest, most rigid loads: metal, lumber, machineryHighest strength and least stretch; sharp edges mean edge protection and careful handling

Copy neededConfirm the steel grades and finishes stocked before listing them.

Tools, seals, and buckles

Strapping only holds as well as its closure. We carry open and closed seals, wire buckles, tensioners, sealers, cutters, dispensers and carts, and chute and tabletop strapping machines for higher volumes. Tell us what you’re running now and we’ll match the strap width and seals to it.

Edge and corner protectors

Edge protectors spread strap tension across the corner of a load, so the strap doesn’t cut into the top boxes or crush the edges. We stock fiberboard, corrugated, foam, and V-board protectors. They’re cheap insurance on any strapped pallet and work with stretch wrap, too.

STRAPEDGE PROTECTORLOAD (TOP BOXES)
Diagram

Strapping and stretch wrap together

For heavy or sharp-edged loads, many shippers use both: stretch wrap to hold the load together and strapping to tie it to the pallet. If your loads are shifting with film alone, strapping is usually the next step. A stronger box on the bottom tier helps too, from our stock corrugated boxes or a custom box built around your product.

Working safely with strapping

Strap under tension can snap back when cut. Use a proper cutter, stand to the side, and wear eye protection and gloves, especially with steel.

Tell us what you’re strapping, how heavy it is, and whether you strap by hand or machine.

We’ll recommend the strap, seals, and tools.

Request a QuoteCall